March 02, 2021

This research builds on earlier work by Herman

Many are still managing with blood droplets on glucose strips, thenusing self-injection," he said. Those techniques include colloidal nanolithography and electrohydrodynamic printing, or e-jet, which is somewhat like an inkjet printer that creates much finer drop sizes and works with biological materials instead of ink."Even with the contact lens, someone could still manage their diabetes with self-injection.Their high sensitivity could also measure things such as pulse rate, oxygen levels, and other aspects of health monitoring that require precise control. The study appears in the journal Nanoscale. "We can integrate an array of sensors into the lens and also test for other things: stress hormones, uric acid, pressure sensing for glaucoma, and things like that," he said. New York: Diabetes patients may soon be able to monitor their blood sugar with contact lenses - spelling an end to painful jabs - thanks to scientists who have developed a transparent sensor.


This research builds on earlier work by Herman and other OSU engineers that developed a glucose sensor that could be wrapped around a catheter, such as one used to administer insulin from a pump.Type 1 diabetes, formerly known as juvenile diabetes, can lead to serious health complications like retinopathy, blindness, neuropathy, kidney and cardiac disease, if the glucose level is not carefully controlled. "We have fully transparent sensors that are working," said Greg Herman, professor at OSU.The sensor developed by the researchers from Oregon State University (OSU) in the US, uses a nanostructured transistor that can detect subtle glucose changes in physiological buffer solutions, such as the tear fluid in eyes. The sensor and pump would, in effect, act as an artificial pancreas."We can monitor many compounds in tears and since the sensor is transparent, it doesn't obstruct vision," said Herman. Researchers in the OSU said the nanostructured transistor is specifically an amorphous indium gallium oxide field effect transistor (IGZO FET).

The FET's closely packed, hexagonal, nanostructured network resulted from complimentary patterning techniques thathave the potential for famous plastic injection machine manufacturers low-cost fabrication. The sensor could communicate with your phone to warn you if your glucose was high or low," he said..The sensors they fabricated using the IGZO FET will be able to transmit real-time glucose information to a wearable pump that delivers the hormones needed to regulate blood sugar: insulin and glucagon. "A lot of type 1 diabetics dom not wear a pump. The transparent FET sensors, might ultimately be used for cancer detection, by sensing characteristic biomarkers of cancer risk, he said.Such sensors can detect subtle glucose changes in physiological buffer solutions, such as the tear fluid in eyes

Posted by: ridoldiub at 01:11 AM | No Comments | Add Comment
Post contains 439 words, total size 3 kb.

February 25, 2021

Among the many concerns is the issue of microplastics

The proposal, made at the two-day meeting in the central mountain resort of Karuizawa, would be the first-ever framework to reduce plastic pollution in the ocean and is expected to be included in a joint communique by the G20 ministers later Sunday..Tokyo: The Group of 20 major economies was set to seal a deal on reducing marine plastic waste at a meeting in Japan on Sunday where they also discussed energy security following the oil tanker attacks in the Gulf of Oman.Microplastics tend to absorb harmful chemicals and accumulate inside fish, birds and other animals. The ministers agreed on the importance of securing stable energy supplies, he said.Many countries, including Japan, have seen plastic waste pile up in the wake of the ban.


If an international framework on reducing marine plastic waste is agreed, it would be "the first step toward resolving the issue," Hiroaki Odachi of Greenpeace Japan told AFP.Japan "proposed a workable framework" on marine plastic waste that involves emerging and less developed countries, and was welcomed by member countries, environment minister Yoshiaki Harada told reporters late Saturday at the G20 environment and energy ministers&hybrid injection molding machine39; meeting.Japanese industry minister Hiroshige Seko, who is co-chairing the discussions with Harada, said late Saturday that Japan would aim to require businesses to charge for disposable shopping bags by as early as April to help reduce waste."But given the critical situation of ocean pollution with plastics, it is urgently needed to set up legally binding action plans with clear timelines and goals," he added.With only an estimated nine per cent of plastics ever produced recycled, campaigners say the only long-term solution to the plastic waste crisis is for companies to make less and consumers to use less.

Among the many concerns is the issue of microplastics, the tiny pieces of degraded waste that are difficult to collect once they enter the water.On energy security, Seko said Tokyo "is watching with grave concerns at the attacks on oil tankers by someone.Plastic pollution has become an increasing international concern, particularly after bans imposed by China and other countries on the import of plastic waste from overseas.Under the expected agreement, G20 members would commit to undertaking efforts to reduce the amount of plastic waste that ends up polluting oceans and to reporting their progress on a regular basis, according to Japanese media.Many countries in the world already charge for single-use bags or ban them outright.""From a viewpoint of global energy security, it is necessary for the international community # to jointly deal with the act," Seko told the meeting

Posted by: ridoldiub at 01:16 AM | No Comments | Add Comment
Post contains 435 words, total size 3 kb.

February 19, 2021

Others are more cautious but investors overall

This is a big, complex molecule, known as a peptide, which would normally be destroyed by stomach acid and it requires protection with a special compound to boost absorption.Getting this far with oral GLP is already a notable achievement, especially after an earlier oral insulin project was abandoned as uneconomic in 2016. "It will certainly be welcomed by those patients who prefer to go without their breakfast for half an hour rather than have an injection,” said Bailey.LATE BREAKFASTBut oral semaglutide is no plastic injection machine simple tablet.The once-daily pill belongs to a blockbuster class of treatments known as GLP-1s that stimulate insulin production, the first of which were derived from the venomous bite of North America’s Gila monster lizard. "If we get the balance between the drug’s profile and the drug’s price and market access right then we can do phenomenally well,” he told Reuters.. But Clifford Bailey, professor of clinical science at Britain’s Aston University and Dr.LONDON: After nearly a century building a company worth $125 billion based on injectable drugs, Denmark’s Novo Nordisk (NOVOb. Rivals, especially Eli Lilly (LLY. Jason Gaglia, a diabetes expert at the Joslin Diabetes Center in Boston.”If the data stack up from 10 pivotal Phase III studies reporting results in 2018, the new drug could grab more than $5 billion in annual sales, Deutsche Bank analysts believe.


Others are more cautious but investors overall are betting oral and injectable semaglutide combined will supply around two-thirds of Novo’s revenue growth over the next five years, according to Thomson Reuters consensus data. "There is resistance in some patients to move to an injectable medication,” said Dr. So far, all have been injections.Today, GLP-1s are embraced as a highly effective diabetes therapy and semaglutide, which was approved as a once-weekly injection in December, has out-gunned rivals in efficacy.Chief Science Officer Mads Krogsgaard Thomsen said Novo would pay close attention to such factors as it tries to reach the three-quarters of diabetics who are not yet on injections.O), which has a product in early-stage trials.Novo’s oral semaglutide medicine is important for ensuring the group’s long-term growth - a critical mission after 2017 results last week revealed mounting price pressure in a crowded market targeting the world’s 450 million diabetics.That represents a life-line for Novo as it tries to differentiate itself in diabetes at a time when its smaller biopharma division is also struggling, prompting last month’s abortive attempt to buy Belgian biotech Ablynx (ABLX.SHUFFLING TREATMENTSDoctors hope oral semaglutide will provide a new weapon to tackle diabetes earlier with a highly effective therapy.

Novo’s nearest rival in developing an oral GLP-1 is Israel’s Oramed (ORMP. Gaglia in Boston said price would be critical in determining its uptake both among U.” That may be sour grapes by Novo’s arch-rival, whose own work on developing an oral GLP-1 is only at the preclinical stage.N), are watching Novo’s final-stage oral semaglutide trials closely, ahead of the drug’s potential 2020 launch.S. But the needle is still a barrier. Key trials against Lilly and Boehringer Ingelheim’s pill Jardiance and Merck & Co’s (MRK.But making patients wait half an hour for breakfast could affect adherence and is a concern for investors - as is the question of what Novo will charge for a drug that may perform as well as a pricey injection but looks like rival pills that cost half as much. insurers and cost-conscious European healthcare systems. While diabetics with advanced disease need daily insulin shots, those at a less serious stage start on simple tablets, with GLP-1s added as a potent new option since 2005. "Once an oral is available I think there will be significant interest in it.N) Januvia will report later in 2018.Most analysts expect oral semaglutide to beat these rivals in controlling both blood sugar and weight. "The highest limit of where we could consider taking the pricing would be injectable GLP-1 and the lowest level would be somewhere in between current oral drugs and injectable GLP-1,” Thomsen said.BR). Still, the devil will be in the details of the 10 Phase III trials, the first of which will deliver results this quarter. The size of the benefit will feed into Novo’s final pricing decision.If Novo gets over the pricing hurdle, Bailey and Gaglia believe the new pill is set to reshuffle treatment regimens, with oral semaglutide being used as a second or third treatment option after cheap, generic metformin.

Posted by: ridoldiub at 02:13 AM | No Comments | Add Comment
Post contains 738 words, total size 5 kb.

February 02, 2021

Fold in the refined flour and add lemon zest

Fold in the refined flour and add lemon zest. Line the dough in a pie mould, add 1 tbsp of mincemeat mixture into each mould. Take the pastry and divide it into two equal portions. Allow it to cool down. In a separate bowl, beat eggs and dissolve instant coffee in water. l In a pan, add pineapple puree, pineapple chunks and sugar. Bake pies at 180°C for 15-20 minutes until golden brown. Cook in the preheated oven for 45 to 50 minutes, till the crust gets golden. Mix cream, butter and sugar. Cool before releasing them from the muffin trays and dust with icing sugar.Recipe courtesy: chef Pawan Bisht, Junglee BilleeChocolate marquise pieIngredients Bittersweet chocolate 70 gmHeavy cream 2 cups Butter 2 cups Sweet cream butterUnsweetened cocoa powder 1 cupEgg yolks 6Coffee granules cup Water 2 tbspWhite sugar 2/3 cupMethodIn a microwave, melt chocolate and stir until smooth. Remove the plastic wrap and spoon the filling inside the hybrid injection molding machine two halves. Add cinnamon powder and raisins. Set aside.Take a plastic bowl and pour all the dry fruits, add orange juice, apple cubes and spices and mix. Take pie moulds and line them with short crust pastry. Add brown sugar and melted butter to the mixture. Add flour fold into the mixture, don’t over mix. Serve. Spoon this mixture in a pie mould and heat. Garnish with almond flakes and cherry compote. Cream together butter and cocoa powder. Brush it with honey before serving. Roll in round shapes by placing between two plastic sheets, and place in buttered pie crust.


Pour brandy in the end. MethodSift the flour. You may garnish with another cut of star on top of the pie. Whip the cream until stiff peaks form and fold into the chocolate mixture. Add eggs and mix at low speed in a mixer. City chefs share some quick recipes of sweet and savoury pies Mince pie IngredientsFor fillings Red currant 450 gm Raisins 225 gm Sultanas 225 gm Black currant 125 gm Apple, cubed 275 gm Butter 220 gm Brown sugar 185 gm Mixed spices 5 gm Cinnamon powder 5 gm Brandy 125 ml Lemon peel 125 gm Orange peel 125 gmOrange juice 120 ml For the pie dough Soft unsalted butter 500 gm Icing sugar 250 gm Eggs 5 Flour 1 kgMethodWhip soft butter and icing sugar in a bowl to make cream. Re-roll the pastry out and cut 7 cm lids to place on top of the mould and press them on top to seal. Add cocoa mixture. Add grain sugar and brown sugar and cook the entire mixture. Butter a pie dish and set aside. Reduce the temperature to 180°C and bake for another 15 to 20 minutes. Make some nice shapes with the leftover pastry. Recipe courtesy:chef Rahis Khan, The Metropolitan Hotel & SpaHomemade pineapple pie IngredientsMilk for brushing on topSugar 1 tspFor filling: Pineapple, pureed 2 cupLemon juice 1 tspCornflour 2tbspPineapple, finely chopped 1 cup choppedPineapple essence 1/2 tspSugar 3/4 cup or moreWater 2 tbspMethodPreheat the oven at 200°C. Add apples and sauté well. Bake this for 30 minutes at 200°C. Slowly beat in slightly cooled chocolate. Put the mixture in the moulds and cover with strips of the pastry. Slowly add eggs, one by one. 

Keep the mixture in an airtight container over night at room temperature. Mix till it becomes a thick jam. Brush the top with milk and sprinkle sugar on top. Using a knife, stir in just enough of cold water to bind the dough together. Place the dough into the chiller to set.Recipe courtesy: : chef Vijayant Rawat, Mosaic HotelsCherry berry pieIngredientsSweet paste baseRefined flour 300 gmButter 200 gmEgg 1Sugar 100 gm Lemon zestCherry fillingButter 100 gmSugar 100 gmEggs 2Cherry 100 gmRum 30 mlFive spices 5 gm Almond flakes 20 gmFlour 100 gmFillingMix all the ingredients and bake in an oven 180°C for 25-30 minutes. Glaze the mould with rest of the beaten egg, sprinkle caster sugar, then make a small cut on the top. Use your fingertips to rub the butter into the flour until you have a mixture that resembles coarse breadcrumbs with no large lumps of butter remaining.Recipe courtesy: Nidhi Swaroop, home baker. Remove from the oven and set aside. Add cornflour mixed with water and stir well. Serve when cold. Brush the edges of each pie with a slightly beaten egg.Xmas spread is incomplete without the aroma of fresh pies wafting out from the oven. Add in pineapple essence and lemon juice.Recipe courtesy: chef Sukanta Das, Tamra by Shangri-La's - Eros HotelApple pieIngredientsFor short crust pastryRefined flour 2 cupsCubed butter 100 gmCold water 1 cupSalt to tasteMethodPut flour and salt in a large bowl and add butter. Mix dissolved coffee and sugar with egg yolks until smooth. Cook for 5 minutes.For apple pie Granny smith apple, diced 8Unsalted butter cupGrain sugar cupBrown sugar cupHand full of raisinsCinnamon powder 1 tspShort crust pastry MethodPreheat the oven at 220°C.

Posted by: ridoldiub at 02:51 AM | No Comments | Add Comment
Post contains 834 words, total size 5 kb.

January 27, 2021

The auto component industry is bracing for the tectonic

Pune: The auto component industry is bracing for the tectonic shift in the automobile sector from the expected exit of diesel cars and arrival of electric vehicles."Shift of diesel in passenger vehicles has already declined from 58 per cent in FY2013 to 36-37 per cent in FY2019, and the decline will be even steeper post-BS VI transition,” Subrata Ray, Senior Group Vice President at ICRA rating firm told FC."After market supplier service is big business and component manufacturers have the existing market to supply spare parts,” he said, admitting that the industry was facing tough challenges even as diesel car costs would increase 15-20 per cent post BS 6 emission norms. "The transition from combustion engine to e-mobility will massively pick up speed between 2025 and 2030,” he said.Three weeks ago, Maruti Suzuki, the biggest diesel car maker, announced it would stop making diesel vehicles from April 1, 2020 when the new BS 6 fuel emission norms will be introduced. Though most manufacturers have begun the process of aligning their capacities and ca pabilities to the emerging scenario, certain component suppliers for turbochargers and fuel injection component would be hard hit, according to industry captains and auto analysts.


On transition to electric vehicles, Ray said it is still sometime away and hence, it is unlikely to have any material impact on component-makers performance over the next five years."As India moves towards reducing carbon emissions significantly in the years to come, we believe there will be further opportunities beyond diesel/gasoline vehicles and others,” he said, adding that he expects the compact car segment to accelerate towards petrol engines, to begin with.Some companies like Schaeffler India have mentioned the impact of this in their recent quarterly calls, she pointed out.."Casting & forging suppliers will not be significantly impacted, as loss of diesel business can be compensated by gain in petrol – assuming they are supplier for both engine platforms,” he said.BorgWarner, US based company, said it was constantly developing technologies to help companies, as the automotive industry is characterised by constant changes. Its spokesman said the demand for hybrid and electrical architectures will increase in order to comply with the new emissions regulations.Doreswamy also expects opportunities to develop in the hybrid vehicles.Vinnie Mehta, Director General of the Automotive Component Manufactur-ers Association of India, or ACMA, said while the component makers have had a great run with the diesel category, there is another opportunity of catering to huge vehicle parc (a European PET injection molding machine term for total number of vehicles in use) in the country which needs repairing and maintenance.

Ray said component manufacturers are already aware of underlying changes in the industry and they are aligning their capacity accordingly.However, certain component suppliers for turbochargers and fuel injection component may witness some impact on their revenue and profitability, Ray pointed out.However, diversified companies across products and segments, such as passenger vehicles, commercial vehicles, two-wheelers and tractors, would be more insulated from such shocks, Ponniah explained.Specific component firms manufacturing products for turbochargers, feul injection, diesel filters and a few engine components (diesel power train typically has more content than petrol engines) would be more impacted than process capabilities companies, Pavethra Ponniah, Vice President and Sector Head, Corporate Sector Ratings at ICRA, said.The high cost of upgrading existing diesel engines to the BS 6 norms has prompted the automakers to take the hard decision."Most automotive manufacturers in India are well-prepared to meet the BS 6 emission regulations from 2020 as they have been exporters of vehicles/ automotive components to countries where Euro 6 standards exist,” Prashanth Doreswamy, Market Head at Continental India and MD at Continental Auto-motive India, said.At present diesel cars at Maruti, which sells one car out of two bought in the country, account for almost a third of its sales. Mahindra, the third biggest passenger vehicle maker, and Tata Motors also joined in.He said in April 2018, ICRA has estimated that diesel share in passenger vehicles will decline below 25 per cent by FY2022. Moreover, disel cars meeting BS 6 fuel emission norms would be costlier by Rs 2 lakh to Rs 3 lakh

Posted by: ridoldiub at 03:17 AM | No Comments | Add Comment
Post contains 693 words, total size 5 kb.

January 20, 2021

What we eat matters not only to ourselves but also

And what we eat matters not only to ourselves but also to our planet. The wellness and feel-good factors are becoming very important,” says celebrity chef Vicky Ratnani. Even a small step in this direction is huge,” says Rupinder.Items like combs, toothbrushes and straws made of biodegradable material are available in organic and eco-friendly stores and farmers’ markets, and online as well, says Rupinder, who has written a few books on raw PET injection molding machine foods. We need to dig deeper, do things which really make a difference for future generations,” cautions Amey. "There are talks, demos, movies and books, to educate people. "People are facing reality and are ready to make a switch.


"It’s a way of life starting from garbage separation in your house, not bringing in too much of plastic and getting rid of plastic and using better materials like copper and brass,” he adds. Awareness is spreading. "When I was living abroad there was something called protein flips — lots of vegetables accompanied by a piece of meat or a fish,” he recalled and added, "Buying crockery directly from artisans who use organic colours, growing your own vegetables at home and undertaking lacto-fermentation for gut friendly food are also becoming popular. People have to bring their own containers for rice, pulses and even liquid soaps.So how should consumers make the shift to reduce their carbon footprints?"Buying fresh vegetables from the market and stopping consumption of red meat or reducing it to a minimum are two ways. They want to know if it is tested for pesticides or if people were exploited to make a particular product..When the entire world is talking about reducing carbon footprint, how can the food industry be left behind?

Restaurants, chefs and food delivery apps are embracing new technologies and responding to the climate emergency in different ways. Buying directly from farmers, encouraging local artisans and eating seasonal fruit are all important, he says and points out that now different varieties of cereals and legumes are easily available, and should be included in our diet. Veganism is also gaining popularity,” notes Vicky. "It’s very heartening to see the industry responding to the climate change issue, but I personally feel it’s still very superficial.” Marathe and his wife Sujata work to transform food waste and greenhouse gases into useful fuels and green energy."I think the entire world is moving towards cleaner cuisine; people are not really asking how something is made, they ask where it is coming from.There is a surge in the awareness for sure, agrees chef Amey Marathe, but adds that, "We are still very far from really making a difference. From sourcing seasonal and local ingredients and practicing nose-to-tail cooking (ethical, sustainable use of the whole animal) to providing leaf or paper plates and eco-friendly packaging, a conscious effort is being made to ensure zero waste.Revolutionary changes are taking place not only in food production but also in packaging, feels Rupinder Kaur, adding that some shops have done away with plastic packaging even for dry food items. There’s more to responsible consumption than the government banning plastic from time to time.‘We are what we eat’ is one of the maxims of Ayurveda.”Food bloggers also educating people about reducing their carbon footprints

Posted by: ridoldiub at 02:51 AM | No Comments | Add Comment
Post contains 552 words, total size 4 kb.

January 13, 2021

A pork chop will always be more delicious

"A pork chop will always be more delicious on this wheat bran plate than on plastic," says Wysocki with a big grin at the Biotrem factory in Zambrow in northeast Poland.According to Robert Bajko, who sells the university&PVC injection molding machine39;s innovations to entrepreneurs, the cutlery does not require any complex technology or a huge investment. The forks, spoons and knives are even safe for sea creatures to eat.The rosy outlook is backed by the prospect of greater output leading to a drop in the price."We are the only ones so far to have tested the biodegradability of our products on living aquatic organisms and it looks like this cutlery is safe for the environment," professor Helena Janik told AFP. Researchers in the chemistry department of the Gdansk University of Technology have developed a way to make biodegradable cutlery out of potato starch. That figure could soon skyrocket thanks to a decision by the European Union to ban plastic plates and cutlery starting in 2021.


Biotrem is hoping to expand its offer to edible boxes for takeaway meals and catering. Biotrem distributes the plates in Europe, Asia, North America and Australia. But Wysocki says what matters is the tableware is biodegradable. "These aren't huge amounts, but they're enough for us to be optimistic about the future," Wysocki says.Warsaw: Polish inventor and entrepreneur Jerzy Wysocki catches a brown plate, still warm, as it drops out of a machine and he begins to eat the crunchy, fibrous tableware.But "the current price of plastic doesn't factor in the environmental cost, that of recycling and marine pollution," she adds. But he says he is also driven by the desire to help a good cause, "because the amount of rubbish that pollutes oceans is huge and frightening.The Biotrem crew are not the only ones in Poland stepping up to the front line of the war on plastic.The sexagenarian invented the plate some 15 years ago, and today Biotrem makes around 15 million of them a year. In favourable weather conditions, with a little humidity, wheat bran products decompose after a month, or even after two weeks if there is rain. Anyone in the plastic industry can get started "overnight," he enthuses.""To make the plates, we only # use wheat bran, which we compress at a precise pressure point and temperature, using a machine made specifically for that purpose," he explains.

Biodegradable cutleryYou do not have to eat the plate or its packaging to be a friend of the environment."Now, with the measures taken by the EU, even clients who are uninformed about the environment are forced to take an interest in biodegradable products," Then said. Also, it should be possible to harness the same technology to make plates out of corn, barley, oats, cassava and even algae.Eco-conscious clientsBiotrem CEO Malgorzata Then acknowledges, of course, that at 15 euro cents (17 US cents) a pop or 20 percent more for exports, wheat bran plates are more expensive than their plastic counterparts. The research is already at a fairly advanced stage: the only thing left to do is to make the boxes more resistant to liquid and heat. It calls to mind dry cereal flakes or maybe what you would imagine cardboard to taste like. The client Down Under had asked that they check whether earthworms would like the taste, they do."With cassava, the first tests turned out really well and we already have a small group of interested clients," Wysocki adds.A son and grandson of millers, Wysocki got the idea for the tableware when he was looking to use up the leftovers of flour production, which take up a lot of space.. At first, the company targeted clients who were environmentally inclined as well as restaurants and hotels that wanted to offer something original. Taking a bite, the plate does not have much of a flavour

Posted by: ridoldiub at 03:23 AM | No Comments | Add Comment
Post contains 648 words, total size 4 kb.

January 06, 2021

The whole concept might be to beat plastic

"Wherever people are willing to eliminate plastics, we will be there,” concludes Tushar. So when hot food is put inside recycled plastic containers, the nanoparticles in them dissolve and enter our bodies; which according to research, is the major cause of cancer and infertility.Jayesh Harsora, the founder of Vasudhara Green Club, is an advocate for both the plastic ban and for spreading the importance of trees, "We have only learnt to use plastic, but the second thing about plastic is its disposal which we have not learnt. But only awareness is not enough to convince people. So why depend on others when we can take action ourselves? Other than plastic we also want to eliminate dry waste.This collection of plastic bags will now be given to the Nirbhaya Foundation that has been championing the elimination of plastic in the city for the last 18 months. So we send this plastic to make high-speed diesel, which can be used in cars, generators and where every diesel can be used. Just like when you cook food you have to think of all the members of the family. People still don’t know what to do with the unused plastic and we are here to fill that gap. D. We want to provide a valuable and long-lasting alternative,”says Tushar. 


The whole concept might be to beat plastic pollution, but I guess to manage plastic is more important.”The drive has managed to collect 400 plastic bags with the help of students from the college and has distributed 80 indoor and outdoor plant saplings to the donors. When we recycle plastic it turns into a low-grade plastic. We also have a track record of every single plastic bag we collect, as also the saplings distributed."We want to bring forth alternatives for people to dispose their plastic. "We are a group of 150-200 ladies who started giving information about the plastic menace to people.m-18. Environmental Pvt.While this activity earlier took place at Goregaon’s Patkar college, these NGOs now plan to conduct various such drives at colleges, societies and slums across the city. We cannot dump plastics anywhere. The purpose for giving these saplings is to connect with nature and to create a source of oxygen in a city like Mumbai. The NGOs collaborated with the National Service Scheme (NSS) unit of Ramnarain Ruia College in Matunga on Saturday to beat plastic pollution. 

Recycling plastic alone does not assure that plastic will not end up in the landfills and water bodies across the city and this initiative enables citizens to put their unused plastic to good use. A desk was put up at the college quadrangle, where students could deposit a minimum of five plastic bags in exchange for a sapling. Ltd.As Mumbaikars clock in the third week of the plastic ban in the city, two NGOs, Vasundhara Club and Angolichi Goli have come up with an effective solution to prevent the dumping of plastic bags into landfills. plant in Pune, from where, the plastic bags will be incinerated to produce high-speed diesel and biofuel. The collected plastics will now be donated to the Mumbai based Nirbahaya Foundation who will then send it to the G. Our tagline ‘my plastic is my responsibility’ speaks for itself,” says Asmita Gokhale, founder of the Nirbhaya Foundation. We have to develop a sustainable lifestyle.The idea behind this initiative is to promote a steadfast alternative to mitigate plastic pollution. "The reason we are not giving this plastic to the recycler is that only a certain kind of plastic is used by them and after segregation we are still left with heaps of plastic,” says plastic injection molding equipment Tushar Warang from the NGO Angolichi Goli

Posted by: ridoldiub at 01:34 AM | No Comments | Add Comment
Post contains 621 words, total size 4 kb.

<< Page 1 of 1 >>
45kb generated in CPU 0.007, elapsed 0.0218 seconds.
30 queries taking 0.0169 seconds, 56 records returned.
Powered by Minx 1.1.6c-pink.